stamping bearing housing

TK6205-133-2.5 Bergbauschaftlager Gehäuse Idler Flansche Endkappe Labyrinth Dichtungen

TK6205-133-2.5 Mining Heavy Duty Conveyor Roller Idler Flange housing and Labyrinth Sealings 1.TK6205-133 Bearing Housing Description 1.Bearing: 6205 2.Pipe OD: 133mm 3.Thickness:2mm or 2.5mm Specification: 1).Pipe diameter(mm): 60, 63, 76, 89, 108, 133, 159,176,194,219 Length(mm):190, 200, 240, 250... Weitere Informationen

TK6204‐89(83)‐2.5 Lagergehäuse für 6204 Lager SPHC-Gedrücktes Stahlgehäuse

Conveyor Idler TK6204‑89(83)‑2.5 Bearing Housing For 6204 Bearing SPHC Pressed Steel Housing Product Overview This TK6204‑89(83)‑2.5 bearing housing is stamped from Baosteel SPHC pressed steel, specially designed to fit 6204 bearing for conveyor idler roller. Cooperated with TK type labyrinth seal, ... Weitere Informationen

Kundenspezifische Verarbeitung TK6205 Schwerlastförderer-Lagergehäuse

Custom Processing TK6205 Heavy Load Conveyor Bearing Housing 1. Bearing : 6205 2. Tube O.D. :76/89/102/108/114/127/133/140/152/159 mm 3. Shaft Dia. :25mm 4. Bearing Housing O.D. :72/83.84.85/97/103/109.110/121.122/127.128/134.135.136/146.147/152.153 mm 5. Upper Bore O.D. : 52.1mm 6. Bore Dia. :40 mm ... Weitere Informationen

Heavy‑Duty TK6204‑60‑3.0 Bearing Housing Labyrinth Seal Type for Mining Conveyor Idler TK6204‑60‑3.0 Stamped Bearing Housing SPHC Steel TK Labyrinth Seal Housing for Conveyor Idler Roller Model: TK6204‑60‑3.0 Material: SPHC steel Matching bearing: 6204 Seal type: TK labyrinth seal Application: Belt ... Weitere Informationen

Anpassen von 2,5 mm Labyrinthdichtungen Stahllagergehäuse für Gürtelförderer Idler Roller

High Quality Roller Spare Parts Steel Bearing Housing/stand for Belt Conveyor Idler Roller Product Description Stamped bearing housing is key component of conveyor idler and is used at both ends of the roller to support the bearing and seals. Because the bearing housing can directly affect the ... Weitere Informationen

TK6304-103-3 Stahllagergehäuse mit Labyrinthdichtung für Fördersysteme 103 mm Rohr O.D.

Factory Direct Supply Wide Use | TK6304-103-3 Stamped Bearing Housing with Labyrinth Seal 1. Bearing : 6304 2. Tube O.D. :103 mm 3. Shaft Dia. :25mm 4. Bearing Housing O.D. :97 mm 5. Upper Bore O.D. : 62.1mm 6. Bore Dia. :40 mm 7. Bearing Seat Dia. :62 mm 8. Deepness :45 mm 9. Thickness :3.0/4.0mm ... Weitere Informationen

DTII6204-108 SPCC Kaltgewalzte Stahllagergehäuse mit 45 mm Befestigungstiefe und tiefgezogenen Stempeln für Förderroller

Product Introduction DTII6204‑108 stamped bearing housing is specially designed for both ends of conveyor idler roller. Made of premium SPCC cold‑rolled steel sheet, with 45mm mounting depth. The whole workpiece is finished through 7 strict stamping procedures, featuring precise dimension and long... Weitere Informationen

SPHC SPCC TK6204-108-2.5 Schachtlager Gehäuse Lager Endkappe für Leerlaufförderroller Bergbau

SPHC SPCC TK6204-108-2.5 Bearing End Cap And Labyrinth Seals For Heavy Duty Idle Conveyor Roller In Mining quick detail: Roller Model:TK Bearing Type: 6204 Roller Diameter:`108mm product description: Full Set of the TK Series Bearing Housing Including: 1* Bearing Housing (SPHC) 2* Female labyrinth ... Weitere Informationen

Förderrollen-Zubehör-Rollenlagergehäuse TK6204 mit Labyrinthdichtungen

Conveyor Roller Accessory Roller Bearing Housing 6204 Series TK Type With Labyrinth Seals TK6204-84 Bearing Housing Description 1. Bearing: 6204 2. Bearing seat diameter: 47mm 3. Pipe OD: 89mm 4. Outside flange diameter: 84mm 5. Bore diameter: 35mm 6. Deepness: 42.5mm 7. Shaft: 20mm 8. Thickness: 2... Weitere Informationen