english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
2.5mm 108mm Außendurchmesser TKII-Modell Lagergehäuse mit hochpräzisen Dichtungen für Förderwalzen
Product (TKII Series Bearing Housing and Seals): Four advanced technology stamping production line including the first robot arm production line of bearing housing in China. Factory introduction Our factory are professional in manufacturing & exporting bearing housing and seals for more than 15 ... Weitere Informationen
TK6205-133-2.5 Bergbauschaftlager Gehäuse Idler Flansche Endkappe Labyrinth Dichtungen
TK6205-133-2.5 Mining Heavy Duty Conveyor Roller Idler Flange housing and Labyrinth Sealings 1.TK6205-133 Bearing Housing Description 1.Bearing: 6205 2.Pipe OD: 133mm 3.Thickness:2mm or 2.5mm Specification: 1).Pipe diameter(mm): 60, 63, 76, 89, 108, 133, 159,176,194,219 Length(mm):190, 200, 240, 250... Weitere Informationen
Kundenspezifische Verarbeitung TK6205 Schwerlastförderer-Lagergehäuse
Custom Processing TK6205 Heavy Load Conveyor Bearing Housing 1. Bearing : 6205 2. Tube O.D. :76/89/102/108/114/127/133/140/152/159 mm 3. Shaft Dia. :25mm 4. Bearing Housing O.D. :72/83.84.85/97/103/109.110/121.122/127.128/134.135.136/146.147/152.153 mm 5. Upper Bore O.D. : 52.1mm 6. Bore Dia. :40 mm ... Weitere Informationen
TK6304-103-3 Stahllagergehäuse mit Labyrinthdichtung für Fördersysteme 103 mm Rohr O.D.
Factory Direct Supply Wide Use | TK6304-103-3 Stamped Bearing Housing with Labyrinth Seal 1. Bearing : 6304 2. Tube O.D. :103 mm 3. Shaft Dia. :25mm 4. Bearing Housing O.D. :97 mm 5. Upper Bore O.D. : 62.1mm 6. Bore Dia. :40 mm 7. Bearing Seat Dia. :62 mm 8. Deepness :45 mm 9. Thickness :3.0/4.0mm ... Weitere Informationen
Anpassen von 2,5 mm Labyrinthdichtungen Stahllagergehäuse für Gürtelförderer Idler Roller
High Quality Roller Spare Parts Steel Bearing Housing/stand for Belt Conveyor Idler Roller Product Description Stamped bearing housing is key component of conveyor idler and is used at both ends of the roller to support the bearing and seals. Because the bearing housing can directly affect the ... Weitere Informationen
DTII6204-108 SPCC Kaltgewalzte Stahllagergehäuse mit 45 mm Befestigungstiefe und tiefgezogenen Stempeln für Förderroller
Product Introduction DTII6204‑108 stamped bearing housing is specially designed for both ends of conveyor idler roller. Made of premium SPCC cold‑rolled steel sheet, with 45mm mounting depth. The whole workpiece is finished through 7 strict stamping procedures, featuring precise dimension and long... Weitere Informationen
SPHC SPCC TK6204-108-2.5 Schachtlager Gehäuse Lager Endkappe für Leerlaufförderroller Bergbau
SPHC SPCC TK6204-108-2.5 Bearing End Cap And Labyrinth Seals For Heavy Duty Idle Conveyor Roller In Mining quick detail: Roller Model:TK Bearing Type: 6204 Roller Diameter:`108mm product description: Full Set of the TK Series Bearing Housing Including: 1* Bearing Housing (SPHC) 2* Female labyrinth ... Weitere Informationen
Förderrollen-Zubehör-Rollenlagergehäuse TK6204 mit Labyrinthdichtungen
Conveyor Roller Accessory Roller Bearing Housing 6204 Series TK Type With Labyrinth Seals TK6204-84 Bearing Housing Description 1. Bearing: 6204 2. Bearing seat diameter: 47mm 3. Pipe OD: 89mm 4. Outside flange diameter: 84mm 5. Bore diameter: 35mm 6. Deepness: 42.5mm 7. Shaft: 20mm 8. Thickness: 2... Weitere Informationen
Stempelgehäuse Lager für tiefgreifende Kugellager
TK6204-89mm 2.5mm SPHC Pressed Flange Bearing End Cap Labyrinth Shaft Seal 1. TK6304-89 Bearing Housing Description 1. Bearing: 6204 2. Pipe OD: 89mm 3. Bearing housing OD:83/84/85 mm 3. Thickness:2, 2.5 or 3 mm Specification: Bearing Shaft Diameter Pipe O.D. Bearing Housing O.D. Upper Bore Diameter ... Weitere Informationen
